Mil s 5002 d

This presentation of DoD Instruction The essential content is the same; however, this document includes hyperlinks to improve the reader's experience and a full-context paragraph numbering scheme. Therefore, no redline text appears in this version of DoDI Authorizes Milestone Decision Authorities MDAs to tailor the regulatory requirements and acquisition procedures in this instruction to more efficiently achieve program objectives, consistent with statutory requirements and Reference a.

Assigns, reinforces, and prescribes procedures for acquisition responsibilities related to cybersecurity in the Defense Acquisition System. Incorporates and cancels Directive-type Memorandum Reference cl. The overarching management principles and mandatory policies that govern the Defense Acquisition System are described in Reference a.

This instruction provides the detailed procedures that guide the operation of the system. The MDA will establish procedures for assigned programs using this instruction as guidance. MDAs should tailor regulatory procedures in the document consistent with sound business practice and the risks associated with the product being acquired. Component-required procedures will not exceed those specified in this instruction.

Statutory requirements cannot be waived unless the statute permits. In addition to the responsibilities described in paragraph 4. The Secretary concerned, in coordination with the Chief of the Military Service fielding the system, will balance resources against priorities and ensure appropriate trade-offs are made among cost, schedule, technical feasibility, and performance throughout the life of the program.

The Chiefs of the Military Services fielding MDAPs will represent the customer and, with the Secretary of the Military Department acquiring the MDAP, balance resources against priorities and ensure that appropriate trade-offs are made among cost, schedule, technical feasibility, and performance throughout the life of the program. The statutes governing defense acquisition programs are complex, and the categories into which a program falls will impact acquisition procedures.

mil s 5002 d

The structure of a DoD acquisition program and the procedures used should be tailored as much as possible to the characteristics of the product being acquired, and to the totality of circumstances associated with the program including operational urgency and risk factors.

Statutory requirements will be complied with, unless waived in accordance with relevant provisions. This waiver authority may not be delegated. Detailed provisions and requirements for this waiver are identified in Table 6 in Enclosure 1 of this instruction. All defense acquisition programs are designated by an ACAT i. MDAP and MAIS program designations carry the greatest consequences in terms of management level, reporting requirements, and documentation and analysis to support program decisions.

Treta dos 8000 STETSOM - BANDA - SOUNDIGITAL e TARAMPS

Enclosure 1 of this instruction identifies the information requirements associated with all standard program categories or types in tabular form. Table 1 in Enclosure 1 provides specific definitions, funding thresholds, and decision authorities. These designations are defined in statute and have procedural and policy consequences.

Consequently, reviews will be issue and data focused to facilitate an examination of relevant questions affecting the decisions under consideration and to allow the MDA to judge whether the program is ready to proceed. The following policies will guide decision reviews:.The military specification referred to as MIL-DTL, "Military Specification, Chemical Conversion Coatings on Aluminum and Aluminum Alloys" covers chemical conversion coatings formed by the reaction of chemical conversion materials with the surfaces of aluminum and aluminum alloys.

Although prepared specifically for DoD applications, the standard is used for many commercial applications as well. It has gained world wide use across many fields versus the more verbose ISO equivalent i. Note that chromate conversion coatings have been used for over 50 years as treatment to coated or as-fabricated surfaces to boost corrosion resistance and provide a good basis for the subsequent application of paint.

However, these treatments use hexavalent chromium chemicals that are extremely toxic. This has led to progressively greater restrictions, imposed by national and international legislation, related to concerns over health and safety and environmental protection, on the use of these treatments.

The MIL-DTL specification covers chemical conversion coatings that form protective coatings by chemical reaction with aluminum and aluminum alloy; these coatings are categorized by the following types and classes.

The conversion coatings are intended for use on aluminum and aluminum alloy substrates that are not anodized. They are used to repair anodized coatings on aluminum. They are designated as a post treatment to ion-vapor deposition IVD aluminum used on many military platforms as a cadmium alternative or galvanic corrosion inhibitor.

Type I and II conversion coatings provide corrosion protection on unpainted items, as well as improve adhesion of paint finish systems on aluminum and aluminum alloys. The conversion coatings covered by this specification exceed most commercially available products. This is a requirement due to their use on military aircraft. From Wikipedia, the free encyclopedia. Categories : Corrosion prevention Military of the United States standards.

Namespaces Article Talk. Views Read Edit View history. Languages Deutsch Edit links. By using this site, you agree to the Terms of Use and Privacy Policy.Follow USArmyEurope. Skip to main content Press Enter. Latest News and Video. Military spouse makes face coverings, donates material Erin Hyde of U. Army Garrison Stuttgart user her time at home to help fabricate face coverings and donates her extra supplies to others.

Army Europe Spotlight: 2nd Cavalry Regiment. Eric Riley delivered personal protective equipment April 7,to the municipalities of North and South Mitrovica. Caitlin Brooks, U. Army Europe Medical Planner, to talk to her about the importance of physical resilience during her isolation.

Benelux Task Force seeks to cure cabin fever Army Garrison Benelux stood up a new task force to alleviate the harmful effects of the newly imposed isolation Families and community members were likely to face. VIdeo: Go for a Family Walk!

Jay Bartley talks about the importance of maintaining some outdoor physical activity to help combat feelings of anxiety caused by COVID Team Clean consists of troops pulled from units across the garrison assigned to clean workspaces of people who have tested positive for COVID Video: rd Airborne Brigade's Essential Mission.

DAOD 5002-1, Enrolment

Special times call for special measures as the U. Army continues with its primary mission: protecting the troops and combating the spread of the coronavirus. Infograph: U. Army Europe Face Covering Tactics. Click to Download: In response to the Department of Defense's policy regarding cloth face coverings and the coronavirus, U. Latest News, Releases and Advisories. Army Europe Facebook.By using this IS which includes any device attached to this ISyou consent to the following conditions:.

Communications using, or data stored on, this IS are not private, are subject to routine monitoring, interception, and search, and may be disclosed or used for any USG-authorized purpose.

This IS includes security measures e. Notwithstanding the above, using this IS does not constitute consent to PM, LE or CI investigative searching or monitoring of the content of privileged communications, or work product, related to personal representation or services by attorneys, psychotherapists, or clergy, and their assistants. Such communications and work product are private and confidential. As a Community Administrator for my organization, I am ultimately responsible for all content on the Community which I author and agree to immediately remove any content that is offensive or inappropriate.

I have been issued a Community Administrator author lite license for access to build and maintain all Communities to which I am assigned and understand that license cannot be transferred to anyone during the period in which I am its rightful owner.

This includes any device attached to this IS that is provided for U. Government authorized use only. I fully understand this includes security measures e. Government interests and it is not intended for any personal, private or public use. I Accept.Threats against our country are evolving.

Global adversaries seek to destroy our nation's security. They do not restrict themselves to borders, boundaries, or conventions. Our people are stationed at home and overseas, gathering insights and building alliances to help reshape and minimize the global threat environment. We have a long history of challenging the status quo and overcoming what others think is impossible.

Our teams have their sights on the horizon, ever ready to defeat the unknown. The Defense Threat Reduction Agency enables the Department of Defense, the United States Government and International partners to counter and deter weapons of mass destruction and improvised threat networks.

DTRA carries out its mission by providing subject matter expertise and material solutions to Combatant Commanders and military Services across a number of mission areas including the nuclear enterprise, building partnership capacity, improvised threats, treaties and on-site inspections, and countering threat networks.

Cooperative Threat Reduction. Nuclear Enterprise. Strategic Integration. Stephen R. Belvoir headquarters, December 7 for a series of briefs and discussions in an effort to increase collaboration between the commands.

mil s 5002 d

Skip to main content Press Enter.The Preventive Maintenance Monthly is series of United States Army technical bulletins published since June as a monthly magazine with comic book-style art to illustrate proper preventive maintenance methods. Don't have an Account? Sign Up. The primary number used to identify an item of production or a range of items of production, by the manufacturer individual, company, firm, corporation, or Government activity which controls the design, characteristics, and production of the item by means of its engineering drawings, specifications and inspection requirements.

Any additional number, other than a primary number codes 1,2,3,4 informative reference code 6 or vendor item drawing reference code 7 assigned to an item of production or supply by a commercial or Government organization, which represents the same item of production or supply to which the National Stock Number NSN was assigned. The reference number may have had an RNCC of 1, 2, 3, 4 or 7 but has since been replaced in the item-of-supply concept of the NSN by another primary number.

If sources are limited to the prime contractor and a subcontractor, a competitive code shall not be assigned unless both sources are expected to compete independently for contracts for the part.

Valid AMCs: 1 and 2. The data is available for unlimited use and will be furnished by the activity identified by the RNAAC upon request. NOTE: This code is to be allocated to reference numbers still requiring checks on procurement authority.

Popular Publishers

NOTE: This code may be used for obsolete or informative reference numbers only. In addition, in generic relationships, a code 1 item is related to a code 2 item.

mil s 5002 d

File data coded KFD is forwarded. See volume 4, chapter 4. Represents an item for which a U. The item is centrally managed, stocked, and issued. Requisitions must contain the fund citation required to acquire the item. Closure sealing and reinforcement shall be in accordance with the appropriate shipping container specification.

However, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. Equal or better protection shall be given the item and there shall be no increase in the package cost. Q uestions? Menu Log In. What is an NSN? Remember me? Forgot your password?The applicant:. The applicant may only be enrolled upon their release from the other military force.

Note — An applicant who is a Canadian citizen and a citizen of another country may be liable for military service in that other country. For applicants with former service in any other military force or the RCMP, the above includes any reason analogous to one of these Items.

Note — All previous CDS orders, instructions and authorizations that provided authority for officers subordinate to the CDS to authorize the enrolment of applicants with former service have been revoked. Note — If a specific component or sub-component is not mentioned, the standard and requirements do not apply. Note — An applicant whose common enrolment medical standard has been waived is still required to meet the minimum medical standard assigned to the selected military occupation.

The words of the oath or solemn affirmation cannot be amended to suit individual beliefs. On request, an applicant may hold or place their hand on a religious book, sacred scripture or symbol appropriate to the applicant's faith when taking the oath.

The applicant shall be asked to bring the item to the attestation. Note — The applicant is required to sign Form CF and then take the oath or solemn affirmation. Should clarification of the policies or instructions set out in this DAOD be required, CAF members may seek direction through their chain of command. Non-compliance may also result in the imposition of liability on the part of Her Majesty in right of Canada and CAF members.

Marine Corps Base Camp Smedley D. Butler

You will not receive a reply. Skip to main content Skip to "About government". Overview Context 2. Eligibility and Selection 2.

Service 2. Action by Applicant 2. Qualifications for Enrolment General 3. Citizenship 3.

mil s 5002 d

Good Character 3. Minimum Age 3. Membership in Cadet Organizations 3. Component and Sub-Component Selection General 4. Res F Agree to undertake other than continuing, full-time military service when not on active service.

Special Force Agree to undertake continuing, full-time military service. Special Force P Res Able to complete, prior to retirement age, military training and two years of service for each year or part year of training time.


thoughts on “Mil s 5002 d

Leave a Reply

Your email address will not be published. Required fields are marked *